The MS in Textile Engineering requires the successful completion of 36 credits.

Core Course 15 credits
Electives 12 credits
Research Thesis 9 credits

Most full time students complete these requirements in two academic years.

Core Courses

MT11 3 credits
Fiber and Yarn Studies
This course advances the knowledge of fibers and yarns. In the case of cotton and wool, a detailed study of how fibers are produced is made and how the properties and structure of fibers vary in relation to variability in growing conditions is explored. For man-made fibers, the length and fineness can be changed during manufacture depending on the type of system on which the yarn is to be produced. Yarn processing systems are covered in detail along with faults that can result from various causes, in either the fiber or the machines. Quality control procedures are emphasized at each stage of processing, along with methods for analyzing test results. Typical products are discussed from the point of view of type of fiber used and type of yarn structure.

MT13 3 credits
Coloration and Finishing Studies
Applications studied in detail will include methods of imparting dimensional stability to cotton fabrics through cross-linking; the problems associated with dyeing fiber blends; textile printing using pigments and various dyes. A study will also be made of binders, e.g., latex use in pigment printing and dyeing. Other methods of textile coloration, e.g., solution dyeing, garment dyeing and transfer printing, will be considered. Instrumental color measurement will also be covered.

MT21 3 credits
Analytical Methods
Statistical process control theories and methods are discussed, and applications toward optimizing both process and product quality in modern textile operations are considered. The objective of these studies is to develop a process/product control system for the progressive textile plant of today. Another major segment of this course will be the review and employment of various methods of analysis of experimental data. Various techniques, and their advantages and disadvantages, will be considered and studied using textile applications.

MT51 3 credits
Advanced Woven Structures - Product Development
Independent pursuit of goals in the development of woven fabrics is emphasized. The student will complete three projects, with product development skills enhancement as a primary goal. Each project will require a search of current literature, the use of CAD, selection of equipment, production of a prototype fabric and submission of a technical report. Two of the projects will be selected by the course advisor and the third will be student-selected.

MT52 3 credits
Advanced Knitted Structures - Product Development
This course is an in-depth study of weft and warp knitting technologies, fabric constructions, and apparel, home furnishing and industrial products/applications/markets. Weft knit fabric technologies studied include single flat and tubular, double knit, fully fashioned, electronic, etc. Warp knit fabric technologies studied include tricot and raschel, weft inserted, double needle bar, multiaxial, etc. Students are exposed to a variety of weft and warp knitting machines, stitch constructions, and mechanical and electronic design/pattern mechanisms. Knit fabric geometry is analyzed on the machine, off the machine and after finishing. The relationship and interactions between the knitting yarn and knitting elements are well established. Knitting productivity and quality factors are emphasized.

Electives 12 Credits
(four courses to be chosen in consultation with graduate advisor)

FB13 3 credits
Characterization of Fibrous Materials
Topics will include chemical nature, structure; mechanical, electrical, and thermal properties; viscoelastic properties, use of instrumentation with computer-controlled data acquisition; IR, RAMAN, and molecular spectroscopies; SEM; and creep/stress relaxation. The physical and mechanical testing of fibers, yarns and fabrics are studied, along with the static and dynamic load response of textiles.

FB21 3 credits
Mechanics of Materials
Definitions of stress and strain, uniform states of stress and strain, transformations, principal axes, stress/stress relations, strain/displacement relations. Equilibrium, boundary conditions, simplifying assumption, and yield criteria are presented.

FB22 3 credits
Mechanics of Textiles
Hierarchical mechanical dependency relationships in textiles are discussed. Included are the role of fiber and yarn twist, yarn crimp, finishes, and coatings to mechanical response of textiles. Dynamic and static response to various types of loading are investigated. Tearing, abrasion, and wear properties as a function of textile form are presented.

FB24 3 credits
Advanced Textile Composites
The objectives of this course will be to expose the student to the textile materials and processes used in composite applications and to introduce methods of analyzing and predicting the behavior of the resultant products. Fiber architecture of textiles used for composites is reviewed along with manufacturing processes. Tools for predicting elastic properties will be introduced along with the relationship of elastic properties and geometric considerations.

FB25 3 credits
Biomaterials Technology
General introduction to the uses of artificial materials in the human body for the purposes of healing, correcting deformities, and restoring lost function are presented. Topics include biocompatibility, techniques to minimize corrosion, and specific uses of materials in various tissues and organs.

MT53 3 credits
Advanced Nonwoven Structures -Product Development
Nonwovens have a vast range of physical properties and end-use applications with an exceptionally high performance-to-price ratio. Such remarkable characteristics are possible due to the range of fiber type, bonding methods, and finishing methods possible at an exceptionally low cost. This course is intended to give a broad range of knowledge in nonwoven manufacturing methods cost and end use applications and consumption. This will be accomplished by lecture, laboratory experiments, literature searches, research, cost analysis, statistical comparisons and modeling.

MT55 3 credits
Advanced Yarn Studies
This section of Yarn Studies allows for an independent pursuit of advanced knowledge through a literature search in a selected area of research. Further, the course is structured toward an advanced study of the newer methods of yarn manufacture, and the latest developments in processing, computerized control, and testing methods. Relationships between yarn properties and product properties are investigated.

MT59 3 credits
Product Evaluation
The processes for the evaluation of fabrics and products are examined. The use of product assessment as a tool for process and product improvement is emphasized. The complexity of the fiber, yarn, fabric, and product forming systems is such that it requires careful evaluation at each stage of the manufacturing process. A comprehensive understanding of the interrelationships of the fabric and product forming stages as related to their evaluation is developed. Established and innovative methods of evaluation are explored.

MT62 3 credits
Textile and Apparel Operations Management
This course is intended to cover the usual operations management topics, but with direct emphasis on textile and apparel operations. It deals with such topics as global competitiveness, product layout, strategies of life cycle management, capacity planning and forecasting, quality management, materials management, human resource management, facilities management, production planning, characteristics of textile equipment, and managing technological change.

MT91 3 credits
Quality Management
Quality has emerged as a formal management function—no longer restricted to manufacturing and operations areas, it now includes the design, purchasing, and marketing processes. Through lecture, discussion, and experiential activities, this course examines quality theory and practice—how a more sophisticated understanding of quality can lead to a strategic approach to utility management which is necessary to compete in today's world marketplace. Factors required for creating and maintaining a corporation's strategic and competitive edge are thoroughly analyzed.

MT98 3 credits
Independent Study
Students may select an independent project or research topic with the approval of the dean of the School of Engineering and Textiles.

Thesis 9 credits

FB41 9 credits
Research Thesis
In consultation with the thesis advisor, the student will select an area for concentrated study. The elements of the study will include, but not be limited to, literature searches, experimental design, research, thesis preparation, and oral thesis presentation. This project is the culmination of a rigorous preparation in one or more areas of specialization and leads to the establishment of expertise in a chosen field. (20 hours minimum per week)

Foundation courses:
For students matriculating in MS Textile Engineering program with no undergraduate background in textiles, a group of foundation courses may be required. Please contact engineering@philau.edu for further information.